Garage Shed Repair Leola PA
These sheds are used for Storage Rental Units. The sheds are around 20 years old and had some rotted pieces of T111 and the trim around the garage doors was falling off. I also gave them a new paint job and installed new corner trim.
Storage Shed Repair New Holland PA
This 12×24 Saltbox Storage Shed Repair included repairing some rotted wood around the outside and then installing vinyl siding. I also replace the shingles and the rotted pieces of sheathing. The doors were falling apart so I made and installed new shed doors.
This shed was in desperate need of repairs. The customer was planning to get a new shed but then heard about my option of repairing the shed. I stopped to see the shed and gave him a price which was way below the cost of a new shed. With 2 days of work this shed was totally transformed!
Shed Pad in Leola PA
This shed was did not have a pad under it and was not setting level. I removed the shed with a shed moving machine and installed a pad then moved the shed onto the new pad.
This shed was not setting level with the right side about 1′ lower than the left side. First I had to disconnect the wire cable that took the electric to the shed. Then I moved the shed off of the pad with a “mule” (shed moving machine) then leveled the ground and placed 4×4’s around the perimeter. The 4×4 perimeter was made a little bigger than the shed so it fit perfectly onto the new pad. Then I installed around 4 inches of stone to complete the level pad. The shed was placed back onto the pad and I reinstalled the electrical wiring. I also do shed repairs, including shed doors, roofs, install vinyl siding and much more.
Replace Shed Shingles
This was a Shed Shingle Replacement because the shingles were deteriorating.
These shingles were deteriorating really bad in the back side and little in the front. The rain water was starting to rot the sheathing on the one back corner. I had to cut a small piece of rotted sheathing away then install the new sheathing and shingles. This customer saved a lot of money by having it replaced before more sheathing was rotted. Most times I’m replacing 2-4 pieces and sometime all the sheathing which of coarse adds to the cost.
Garage Door Repair
This Garage Door Repair Was Done In Chester County PA
The garage door was too low for the customers John Deere tractor with a roll bar. I removed the 9×7 garage door and replace it with a 9×8 garage door.
I had to remove all the vinyl siding and trim around the garage door. I had to replace the interior studding with taller studs and headers over the garage door. Then I retrimmed around the garage door and reinstalled the vinyl siding. I installed the 9×8 garage door which gave just enough height for his John Deere tractor with a roll bar. I’ve installed many garage doors when I worked at the shed and garage company for 18 years so installing garage doors is something I’m very familiar with.
Replace T111 Siding, Repaint Shed, and Replacement Shed Doors
This customer went with the option to replace the T111 siding, repaint the shed, and replace the shed doors. The shed looked like it was ready for the burn pile but with a day and a half of work this is the finished project. I replaced all the T111 siding and the rotted 2×4’s around the floor perimeter. I installed the new doors with the X’s and painted the entire shed. This shed repair brought this shed back to life for another 20 years of use.
Shed Repairs In Manheim, PA
This shed repair in Manheim, PA met the need of a customer who didn’t want to pay all the expense of a new shed. This shed needed to be moved and was in desperate need of an overhaul. With 2 days of work this shed was restored like new.
First the customer decided to move the shed so I referred him to a friend of mine is installs the shed pad. After the shed pad was complete then it was time to move the shed. I rented the “mule” (shed moving machine) from my brother. I moved this shed off the old pad onto the new pad prepared by Firm Foundations.
A few days later I started with this project which took 2 days. The work consisted of cutting the rotted T111 off around the bottom and replacing with new plywood. I also covered the gable doors on both ends as per the customers request. I changed the windows opening and installed new windows. Then the facia was wrapped in aluminum after which I covered the shed with vinyl siding. To finish the job I installed fiberglass painted shed doors and installed the ramp. All this was well under the cost for a new shed and will last for years and years.
This was a second shed I repaired for the same customer. This shed repair consisted of new shingles, replacing the bottom rotted pieces of T111, vinyl siding, and new painted fiberglass shed doors. With a little sweat and hard work this shed repair in Manheim, PA was completed in 1 day.
Shed Repair in Lititz, PA
Shed Repair in Lititz, PA
This shed in Lititz, PA needed a major overhaul. The shed repair consisted of cutting 1′ around the bottom then replacing the 2×4’s under the T111. I installed new treated 2×4’s then added plywood where the T111 was cut out. Customer decided she wants to go with the shed vinyl siding option so I prepared it for vinyl by wrapping the facia and overhangs with aluminum. Then installed the shed vinyl siding.
The shingles were deteriorating so I removed the shingles and reroofed the shed. The doors were replaced with fiberglass shed doors and classic shed hinges. I also installed new shed windows with the vinyl J lap.
All this for a fraction of the cost for a new shed!
How To Roof A Shed
How To Reroof A Shed
Shed roofs will deteriorate with time but don’t fret there are cheap ways to take care of the problem. This shed looked like it would fit better on the burn pile but within a few hours it was back to new.
First I took off the old shingles then removed the rotted sheathing under the shingles. Water spots were visible from the inside so I could see ahead of time that there were a few sheathing pieces that would need replaced. There was an obvious leak shown by water marks and discoloring of the pieces. I also reached up and felt the pieces to feel if they were lose.
Here’s how to shingle a shed. Make sure that all the rotted pieces are removed and the staples pulled out. Then install the drip edge all the way around the perimeter. Tar paper goes on next then the shingles on top. You’ll find a shingle cutting diagram on the back of the packs of shingles. If you’re using architectual shingles for the roof, it’s best to switch to 3 tab shingles for the ridge.
That’s how to reroof a shed